Sue's Onesie

Sue's Onesie

Materials

For preemie/small newborn size

Size 4 and 6 dpns or 16 inch circular needles
Sport weight or baby yarn - model made with Lion Brand Baby Soft


3 buttons
Stitch markers
3 snaps
2 pieces of ¼ ribbon (each 16 inches long) for girl sleeves


With smaller needles, cast on 58 sts. Work in K1, P1 ribbing for 3 rows.

Buttonhole row: K1, P2 tog, yo, continue in ribbing. Work 2 more rows in ribbing.

Switch to larger needles and K 1 row, dividing work as follows: K10, inc in next st, place marker, inc in next st, K5, inc in next st, place marker, inc n next st, K20, inc in next st, place marker, inc in next st, K5, inc in next st, place marker, inc in next st, K10. (8 increases)

Row 2: K5, purl across, K5.

Yoke

Row 3: Knit across, continuing to increase before and after each marker on each knit row.
Rows 4, 6, 8, 10, 12, 14: Purl across, Knitting first 5 and last 5 sts of the row.
Row 5: Buttonhole row. Knit across the row working a K1 increase before and after each marker, to within 3 sts of end, then Yo, K 2 tog, K1.
Rows 7 and 9: Knit
Row 11: repeat row 5.
Row 13 and 15: Knit
Row 16 Placket front: Slip the last 5 sts from needle to dpn, hold behind the first 5 sts. (Make sure the buttonholes are to the outside of the shirt.) Knit the 5 sts from the needle and the 5 sts from the dpn together so you end up with 5 sts and a placket opening. Continue to knit the row on dpns (or circular needles) - knitting is circular.

Next round: inc before and after each marker

Continue inc every other round until yoke measures 3 (3 ½) inches. Measure along raglan line, not including the neck ribbing.

Sleeves: knit to sleeve section, the sts between the first and second markers. Leaving all other sts on circular needles work over sleeve sts with larger dpns. Divide sleeve sts into thirds and join to knit circular. (The sleeves could be worked flat and then the inseam sewn after the shirt is finished.) The beg and end of this row will be the sleeve inseam. K 2 rounds, then switch to smaller needles and work 4 rounds of K1, P1 ribbing. Bind off loosely in ribbing. Attach yarn and knit over to the other sleeve section. Repeat sleeve directions.

Variation - Girl Sleeves: work flat in rows.
Row 1: knit
Row 2: purl.
Row 3: K1, *K2tog, yo, repeat from * across. Eyelet row
Row 4: purl
Row 5: knit
Row 6: knit
Bind off in knit.
Thread ribbon through eyelets and tie in a bow on top.

Body: All sts remaining are the body of the onesie. Attach yarn and knit circular on right side joining the front to the back . Continue with the body until it is 7 ½ inches long or desired body length.

Leg shaping: Divide work at sides (46 sts to the back and 45 sts to the front).
Back
Using straight needles work across the back sts (leaving the front sts on circular needles).
Row 1: K1, K2tog, K40, K2 tog, K1
Row 2: p1, p2tog, P38, P2tog , P1

Repeat these 2 rows, decreasing 1 st at each side until 18 sts remain. Work 5 rows even.
Next row: P8, P2tog, P8
Bind off in knit.

Front
Using straight needles work across front sts
Row 1: K1, K2tog, K39, K2tog, K1
Row 2: P1, P2tog P 37, P2tog P1

Repeat these 2 rows decreasing 1 st at each side until 17 sts remain. Work 6 rows even. Bind off in knit.

Finishing:
Sew on buttons
Weave in ends
Sew snaps on crotch opening, lapping front over back.

Copyright, April 2004, Susan A. Coes

Patriotic Wheelchair Wrap

My daughter Stephanie has taken my pattern for the Wheelchair Wrap and made a patriotic version. I think it is beautiful and decided to share a picture of it with you all.

The Ultimate Scrap Quilt

My mother who is bedridden with a variety of ailments, not the least of which is a paralyzed left side and rheumatoid arthritis on the right has been making quilt blocks by hand since last January. She is making her version of a modified log cabin block. I take these home, trim them up and put them together into quilt tops for her and then deliver them to the quilter to be quilted. The other day, it occurred to me that there was a design to be had in all the cut off pieces that I had been dumping into a basket all these months. And voila! the ultimate scrap quilt was born. I took some of the cut offs and put them together jigsaw puzzle style and came up with the quilt pictured here. It is crib or laprobe size. I am pretty happy with it.

Purple Serger Quilt

Just posting a picture of my latest project. My dear friend Polly gave me a pattern for this quilt after giving me a whirlwind lesson on my new serger. This is a quilt meant to be done entirely on the serger. I did cheat a little. I added some quilting lines not in the pattern and did the binding the regular way on my other sewing machine. I think the binding done on the serger creates cumbersome corners. The finished quilt measures about 36 by 36 inches. I think I will hang it on the wall of my sewing room since purple is my favorite color.

Hat to match Bootie Socks

My daughter begged me to write up my directions for the little hat I made to go with the Bootie Socks. So, Stephanie, here you go:

The Hat
Knitted with 2 circular needles

Materials: Worsted Weight yarn (model was made with Caron Simply Soft).
2 -size 8 circular needles with 16 or 24 inch cables
yarn needle

Cuff: With contrasting color, cast 56 stitches onto one circular needle. Being careful not to twist, slip 28 sts to the other circular needle. With the stitches on the needle tips, and holding the tips of the 2 circulars side by side, transfer the 1st st on the left needle (1st cast on stitch) to the right needle, then slip the 1st st on the right needle through the just transferred st and onto the left needle.

Rnd 1: Slide the sts on needle #2 onto the cable part of the needle and then drop it to the back. Using needle #1, knit the 1st 28 sts. Drop needle #1, pick up needle #2, and knit the 28 sts on needle #2.
Rnd 2: Drop needle #2 to the back and using needle #1, purl the 1st 28 sts. Drop needle #1, pick up needle #2, and purl the 28 sts on needle #2.

Repeat rnds 1 and 2 two more times (6 total rows).

Change to main color. Knit every round, always knitting the 1st 28sts with needle #1 and the 2nd 28 sts with needle #2, for a total of 4 1/2 inches from the beginning.

Shaping the Top

Rnd 1: *K2tog, K6, repeat from * around.
Rnd 2: Knit around

Repeat Rnds 1 and 2 decreasing the number of sts between the K2tog by one on each dec row until you get to Rnd 15 (K2tog around). There will be 7 sts left. Cut yarn and thread through the live sts remaining and pull tight.

Weave in ends.
Fold up cuff.

Copyright 2009 Susan A. Coes

all rights reserved

This pattern may be used for personal or charity purposes only. It may not be sold.

Bootie Socks

Bootie Socks

Knitted with 2 circular needles

Materials: Worsted Weight Yarn (model was made with Caron Simply Soft)

2 - size 6 circular needles with 16 inch cables

Yarn needle

Pattern Notes: When slipping a stitch, always slip as if to purl unless otherwise noted.

Each time you switch needles, tighten the 1st stitch to prevent ladders.

Special Stitches: SSK (slip, slip, knit)

1. Slip the next two stitches as if to knit, one at a time, to the right needle.

2. Insert the left needle into the fronts of these 2 sts and knit them tog.

YO = yarn over

Cuff: With contrasting color cast onto one circular needle 24 stitches. Being careful not to twist, slip 12 sts onto the other circular needle. With the sts on the tips and holding the tips of the 2 circulars side by side, transfer the 1st st on the left needle (1st cast on st) to the right needle, then slip the 1st st on the right needle through the just transferred st and onto the left needle. You have just divided your bootie in half. Consider the instep sts to be on needle #2 and the heel to be on needle #1.

Rnd 1: Drop needle #2 to the back and using needle #1 only, K the 1st 12 sts. Drop needle #1 and pick up needle #2, knit the 12 sts on needle 2.

Rnd 2: Drop needle #2 to the back and using needle #1, purl the 1st 12 sts. Drop needle #1, and pick up needle #2, purl the 12 sts on needle #2.

Repeat Rnds 1 and 2 two more times (6 total rows).

Change to main color.

Knit 6 rounds always kniting the 1st 12 sts with needle #1 and the 2nd 12 sts with needle #2.

Rnd 13: K 2tog, YO (repeat around - making sure when you pick up needle #2 you begin with a YO and when you return to needle #1 you begin with a YO). This is the eyelet row. You should have 12 K 2tog and 12 YO.

K 2 rounds

Heel

Using needle #1 only you are going to knit in rows.

Row 1: sl 1, K1 (repeat across)

Row 2: sl 1, purl across

Repeat these 2 rows 5 more times for a total of 12 rows ending with a purl row.

Turning the Heel

Row 1: sl 1, K6, K2tog, K1, turn

Row 2: sl1, P3, P2tog, P1, turn

Row 3: sl1, K4, K2tog, K1, turn

Row 4: sl1, P5, P2tog, P1, turn

8 sts remaining

Gusset

Rnd 1: sl1, knit across. Using the same needle, pick up 8 sts along the side of the heel flap. Drop needle #1, pick up needle #2 and knit across the instep sts. Using the same needle pick up 8 sts along the other side of the heel flap.

Still using needle #2, knit the 1st 4 heel sts from needle #1 onto needle #2. Now slip the 1st 6 instep sts from needle #2 onto needle #1 (18 sts on each needle). You have just shifted your needles so your round begins at the center back of the heel.

Rnd 2: Starting at the center of the heel, knit 12 sts, place marker, K6 sts, switch needles, K6, PM, K12.

Rnd 3: K to within 3 sts of the marker, K 2tog, K1, sl marker, K6, switch needles, K to marker, sl marker, K1, SSK, K to end.

Rnd 4: K around, slipping markers.

Repeat Rnds 3 and 4 until there are 6 sts on each side of each marker (12 sts per needle, 24 sts in all). End with Rnd 3.

Foot

Knit 6 rounds

Toe

Rnd 1: K to within 3 sts of marker, K2tog, K1, sl marker, K1, SSK, K3, repeat on needle #2

Rnd 2: Knit around, slipping markers

Repeat Rnds 1 and 2 until there are 3 sts on each side of each marker (12 sts total) ending with Rnd 1.

Knit 1st 3 sts on needle #1 onto needle #2, removing marker. Slip the 1st 3 sts of needle #2 onto needle #1, removing marker. You are again shifting your sts to prepare for grafting the toe. Cut your yarn, leaving about 12 inches of tail, graft the toe or thread the tail back through the live sts, slip off the needles and pull tight.

Weave in the ends.

Thread contrasting ribbon through the eyelets.

Copyright 2009, Susan A. Coes

Wheelchair Wrap

I created this pattern for those who really like the Weaver's Wool Mini shawl but do not knit. The inspiration for this pattern is here: http://www.knitlist.com/2003/minishawl.htm

I really like the size of this little shawl because it is perfect for those individuals who are wheelchair bound or bed ridden. It covers the shoulders without excess fabric to get caught in chair wheels or bunch up in the bed. It also makes it very easy for care givers to minister to the elderly since their arms are easily accessible.












Wheelchair Wrap
Copyright 2008
Susan A. Coes



Materials: Worsted Weight yarn
approximately 12 ounces
H hook

Special Stitches: V stitch = 1 dc, ch 1, l dc

Chain 54
Row 1: dc in 3rd ch from hook, ch 1, 2 dc in next ch, *dc in next 11 ch, v st in next ch, repeat from * 2 times, dc in next 11 ch, 2 dc in next ch, ch 1, 1 dc in each of last 2 ch, ch 2, turn (58 dc and 5 ch 1 spaces)
Row 2: dc in next dc, ch 1, 2 dc in next dc, *dc in next 13 dc, V st in ch1 space, repeat from * 2 times, dc in next 13 dc, 2 dc in next dc, ch 1, dc in last dc and in top of turning ch, ch2, turn (8 sts increased).
Rows 3 - 28: repeat row 2, following established pattern, always increasing the number of dc between V sts by 2 (each row increases by a total of 8 sts).
Row 29: dc in next dc, ch 1, skip ch 1 space, dc in next dc, *ch 1, skip 1 dc and dc in next st, repeat from * to V st in previous row, ch 1, V st in ch 1 space of V st, ch 1, skip next dc, dc in next dc repeat from * across row to last dc. Ch 1, skip ch 1 space, dc in next dc, dc in last dc and in top of turning ch, ch 2, turn

Row 30: dc in each dc and ch 1 space across, end off, weave in ends.